5 Operation Stages

When lowering or raising an ITS device, there are 5 basic steps, or stages that the Disconnect Unit goes through.

STAGE 2. The second stage is UNLOCKING. Before lowering the camera, the Disconnect Unit must first be raised approximately ¾ inch. During the slight raising operation, the support arms will be pushed to one side by the tracking guide to clear the support notches. Springs inside the socket half of the connector compress as the Disconnect Unit is raised. Electrical and signal contacts are still engaged during this stage. Each Disconnect Unit has a built-in positive stop that, when reached, will alert the operator to begin lowering the camera. Every time the Disconnect Unit is raised from the “locked” position, the support arms will move and unlock the Disconnect Unit.

Learn More

The Heart of the System

Lowering Tool

5 Operating Stages

Integral System

External & Retrofit System

Applications

CCTV/Camera Lowering Systems

Lighting Lowering Systems